NASC

N102711

Name: AT_14027

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102712

Name: AT_14028

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102713

Name: AT_14030

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102714

Name: AT_14032

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102715

Name: AT_14033

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102716

Name: AT_14034

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102717

Name: AT_14037

Price: £11.00

Donor John Innes Centre Caroline Dean

Locus AST91

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102718

Name: AT_14039

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102719

Name: AT_14040

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102720

Name: AT_14041

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102721

Name: AT_14042

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102722

Name: AT_14044

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102723

Name: AT_14053

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102724

Name: AT_14054

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102725

Name: AT_14055

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102726

Name: AT_14056

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102727

Name: AT_14058

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102728

Name: AT_14059

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102729

Name: AT_14060

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102730

Name: AT_14061

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102731

Name: AT_14062

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102732

Name: AT_14063

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102733

Name: AT_14064

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102734

Name: AT_14065

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102735

Name: AT_14066

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102736

Name: AT_14067

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102737

Name: AT_14068

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102738

Name: AT_14069

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102739

Name: AT_14070

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102740

Name: AT_14071

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102741

Name: AT_14072

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102742

Name: AT_14073

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102743

Name: AT_14074

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102744

Name: AT_14075

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102745

Name: AT_14076

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102746

Name: AT_14077

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102747

Name: AT_14078

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102748

Name: AT_14079

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102749

Name: AT_14080

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102750

Name: AT_14081

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102751

Name: AT_14082

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102752

Name: AT_14083

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102753

Name: AT_14085

Price: £11.00

Donor John Innes Centre Caroline Dean

Locus NIA1 NR1

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102754

Name: AT_14089

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102755

Name: AT_14090

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102756

Name: AT_14091

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102757

Name: AT_14094

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102758

Name: AT_14095

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102759

Name: AT_14097

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102760

Name: AT_14098

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.