NASC

N102461

Name: AT_12204

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102462

Name: AT_12205

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102463

Name: AT_12206

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102464

Name: AT_12207

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102465

Name: AT_12208

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102466

Name: AT_12209

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102467

Name: AT_12210

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102468

Name: AT_12211

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102469

Name: AT_12213

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102470

Name: AT_9000

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102471

Name: AT_9008

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102472

Name: AT_9043

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102473

Name: AT_9080

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102474

Name: AT_9099

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102475

Name: AT_9109

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102476

Name: AT_9120

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102477

Name: AT_4000

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102478

Name: AT_4051

Price: £11.00

Donor John Innes Centre Caroline Dean

Locus SDS

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102479

Name: AT_4053

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102480

Name: AT_4059

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102481

Name: AT_4066

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102482

Name: AT_4068

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102483

Name: AT_4071

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102484

Name: AT_4081

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102485

Name: AT_4091

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102486

Name: AT_4093

Price: £11.00

Donor John Innes Centre Caroline Dean

Locus AST91

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102487

Name: AT_4096

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102488

Name: AT_4105

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102489

Name: AT_4106

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102490

Name: AT_4107

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102491

Name: AT_4108

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102492

Name: AT_4110

Price: £11.00

Donor John Innes Centre Caroline Dean

Locus MYB100

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102493

Name: AT_4111

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102494

Name: AT_4118

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102495

Name: AT_4120

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102496

Name: AT_4122

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102497

Name: AT_4125

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102498

Name: AT_4126

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102499

Name: AT_4127

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102500

Name: AT_4128

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102501

Name: AT_4129

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102502

Name: AT_4131

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102503

Name: AT_4132

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102504

Name: AT_4137

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102505

Name: AT_4139

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102506

Name: AT_5012

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102507

Name: AT_5025

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102508

Name: AT_5035

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102509

Name: AT_5041

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N102510

Name: AT_5044

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.