NASC

N101000

Name: AT_10

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101001

Name: AT_111

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101002

Name: AT_115

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101003

Name: AT_119

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101004

Name: AT_129

Price: £11.00

Donor John Innes Centre Caroline Dean

Locus RLK6

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101005

Name: AT_139

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101006

Name: AT_145

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101007

Name: AT_148

Price: £11.00

Donor John Innes Centre Caroline Dean

Locus XSP1

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101008

Name: AT_149

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101009

Name: AT_153

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101011

Name: AT_219

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101012

Name: AT_225

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101013

Name: AT_24

Price: £11.00

Donor John Innes Centre Caroline Dean

Locus DL4655C

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101014

Name: AT_26

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101015

Name: AT_287

Price: £11.00

Donor John Innes Centre Caroline Dean

Locus CPK2

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101016

Name: AT_29

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101017

Name: AT_293

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101018

Name: AT_294

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101019

Name: AT_316

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101020

Name: AT_320

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101021

Name: AT_3215.2

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101022

Name: AT_3217

Price: £11.00

Donor John Innes Centre Caroline Dean

Locus ATML1

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101023

Name: AT_3261

Price: £11.00

Donor John Innes Centre Caroline Dean

Locus ATK1 KATA

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101024

Name: AT_3269

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101025

Name: AT_3281

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101026

Name: AT_3335

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101027

Name: AT_3346

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101028

Name: AT_3347

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101029

Name: AT_3348

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101031

Name: AT_3349

Price: £11.00

Donor John Innes Centre Caroline Dean

Locus PER43

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101032

Name: AT_3383

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101033

Name: AT_3385

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101034

Name: AT_3390

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101035

Name: AT_3391

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101036

Name: AT_3392

Price: £11.00

Donor John Innes Centre Caroline Dean

Locus TUB9 TUBB9

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101037

Name: AT_3393

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101038

Name: AT_3395

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101039

Name: AT_3401

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101040

Name: AT_3402

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101041

Name: AT_3403

Price: £11.00

Donor John Innes Centre Caroline Dean

Locus AKT2 AKT3

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101042

Name: AT_3408

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101043

Name: AT_3410

Price: £11.00

Donor John Innes Centre Caroline Dean

Locus ATML1

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101044

Name: AT_3413

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101045

Name: AT_3417

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101046

Name: AT_3431

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101047

Name: AT_3436

Price: £11.00

Donor John Innes Centre Caroline Dean

Locus ATPK10 CIPK15 PKS3

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101048

Name: AT_3443

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101049

Name: AT_3445

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101050

Name: AT_3447

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

N101051

Name: AT_3478

Price: £11.00

Donor John Innes Centre Caroline Dean

Stock type: individual line

Material type: seed

Description Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR as described on the protocol page (See JIC Activate collection page). This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.

Phenotype Ds activation tagged lines. Flanking sequences were obtained from transposon lines by IPCR or TAIL PCR from the 5' and 3' end of the AT-Ds (in many cases flanking sequence will only have been obtained from one end due to fragment length). All lines supplied should be carefully checked by PCR. This will confirm that the insertion is carried within the line supplied, confirm if the line is homozygous or heterozygous for the insertion, and provide DNA templates for sequencing the ends of the transposon (confirm that the 200bp inverted repeats at the end of Ds are intact). Most importantly this will ensure that you do not waste time in the event that the insertion is not maintained.